Identify the equipment already installed
A DVR commonly records compatible analogue cameras connected over coaxial cable. An NVR records supported network cameras over an IP network. Some recorders support a mixture of technologies, so the product category alone is not enough. Read the exact recorder and camera specifications, including their supported recording modes and resolutions.
Count more than just camera sockets
List the number of cameras needed now and any planned additions. Check supported channels, recording resolution, frame rates and incoming bandwidth. An NVR may offer built-in PoE ports, but other models require a separate PoE switch or camera power arrangement. Check the available power budget against the cameras’ requirements.
Check playback and storage needs
Compare simultaneous playback channels and export options, not only the number of live views. Confirm compatible hard drives and maximum supported capacity. Retention depends on the recording configuration and activity in the scene. Ask the installer to provide an estimate using the settings you intend to use, then verify actual recording history after installation.
Make the handover practical
Ask for a labelled camera list, recorder model and a demonstration of playback and export. Use supported firmware and unique passwords. Do not expose recorder management ports directly to the internet as a quick remote access fix. Ask your installer about secure remote access options appropriate to your equipment and network.
This guide is general information. Features and procedures depend on your exact equipment. Check its manual or ask a qualified installer before making changes.
Further reading
Hikvision product support and documentation · Axis technical support
AM CCTV